Bosch Oven Inner Glass Door Repairs Port Melbourne
A common problem with Bosch oven inner glass doors it that they loose the glass and drop out. The reason the inner glass drops out is its glue adhesive over time looses strength and the glass will than drop out of position.
Bosch Oven Door Repairs Port Melbourne
The choice you have is to repair the door or replace the the inner door which comes with inner metal skin with the glass attached so then you will need to separate the door remove the faulty panel and replace it with the new panel.
Bosch oven door repairs port Melbourne
Or another option at half the price is to contact us and we can re-seal the glass beck into place. This dose require two visits one to pick the door up from the property and then return to refit back on the oven .
Bosch oven door inner glass repairs port Melbourne
The reason for the two visits is the wee need to apply the right pressure on the inner glass for it to adhere and this will take approximately 48 to 72 hours. The surface were the new adhesive takes place is also cleaned and etched so the bonding work takes place.
So if your in the need for a Bosch inner glass repair contact us for further advice.
With Bacchus Marsh only north west of the state capital Melbourne and 14 kilometres west of Melton we attended to a Technika oven noise. Our Bacchus Marsh oven repair tech was near by to take on the work order.
The Maddingley a new suburb in Bacchus Marsh had a Technika oven that was make a load screeching noise. The screeching noise was coming from the fan only on certain settings and not others.
Technika oven repairs Bacchus marsh
Looking at the oven fan above you can see two parts to the unit. The left is the fan blade and the right side is the fan motor with the shaft running through the fan winding.
Over time in the case of this oven fan motor the shaft become sized due tho the heat from the heating element surrounding it.. The these oven fans are not made to be dismantled they need to be replaced completely.
If you looking to purchase the fan kit motor your self please feel free to check out below.
[wp_cart_display_product name=”Original Technika Oven Fan” price=”280.00″ thumbnail=”https://www.ovenrepairmelbourne.com.au/blog/wp-content/uploads/2021/01/technika-oven-repairs-bacchus-marsh-.jpg” description=”Technika Oven Fan suits all 900mm size models. Call to confirm” button_text=”Add Me Now”]
So why dose the fan size oven time .. well our tech has noticed the cooling blade was not fitted to the fan . The cooling blade is used to cool the fan motor from over heating. We believe the fan had been replace once before about 3 years ago .
After installing the new fan motor kit the oven was tested and no more screeching noise from the oven . How did our tech quickly find the issue. We as mentioned before the noise only accrued on some settings not all.
oven function dial
Looking at the oven function dial you can see some oven symbols don’t show a fan . So when we used the functions without the fan there was no noise.
If your in the Bacchus Marsh, Maddingley or Eynesbury Homestead please give us a call and will be glade to help with your Technika, Blanco , Chef ovens.
Have you every had an oven door shatter or explode unexpectedly? Oven door glass shattering are a common problem due to many factors. Today’s service visit in Footsacray next to Maribyrnong City Highpoint.
Footscray an inner-western suburb of Melbourne, 5 km from Melbourne’s Central Business District and its local government area is the City of Maribyrnong. Our service tech had just completed an oven repair in Maribyrnong City High point working on a bymarie in a takeaway food shop.
exploding oven door Footscray
So only a 10 – 15 minite drive to Footacray on Gorden st just past the western hospital. Made it an easy trip for our local service team.
Upon arriving the unit was a Blanco BOSE665X 60cm Electric Built-In Oven. The 60cm Electric Built in Oven door is triple glazed, which improves energy efficiency and helps keep the exterior cooler to the touch but it was the inner outer glass that shattered in peaces.
Blanco BOSE665X 60cm Built In Electric Oven footscray oven glass shattered
Our techs managed to clean the kitchen up made the kitchen safe and then ordered the glass witch took about 5 days to arrive.
So what causes an oven glass to shatter and smash into peaces. There are a number of circumstances that can cause this to happen and this units issue was the oven door handle was loose.
The customer confirm to us that the oven door handle had become loose over time and eventually the screw holding down the handle tears through the rubber absorbers that protect the glass as the bolt handle passes through he glass hole.
Oven Rubber shock absorber pad
So the best way to protect your oven door glass from shattering from this kind of issue is once you notice your oven door handle becoming loose please attend to it as soon as you can .
We offer a local oven door service inspection to Footscray, Maribyrnong, Maidstone , Yarraville , kingsville and Spotswood residence including all North and Western Melbourne.…… so give us a call before its too late.
If your looking for a local oven repair near you in Tarneit than you may be able to relate to this oven repair service. While in Werribee our technician had receive a call to attend a Technika oven repair service Model number
Upright Cooker Tu950Tme8.
So only 15 minuets from Tarneit a western suburb of Melbourne, Victoria, located 25 kilometres from central business district, located within the City of Wyndham local government area and nearby another emerging suburb at Truganina. Our tech needed to find out why the oven was not heating. And what was wrong with the oven door and why it was not closing properly. Looking at some of the features below there are many parts to test and find out why the Technika oven had heating problems first.
Some of the details of the cooker oven that may need fixing
105 Litre oven capacity
8 functions
6 Button programmable digital clock
5 Gas burners
Twin oven fan
Closed door grilling
Twin oven light
Automatic safety cut off
Cavity cooling system
other models of Technika are
B9Geftss-5 manual timer, Tu950Tle8G black enamel fascia.
So how to repair a Technika Oven that’s not heating.
If you follow these steps you may well have solved the oven heating issue. Firstly you will need to turn the power off at the main switchboard. The oven circuit breaker will be labeled oven and should be after the main switch. Please look at the switchboard image below
oven repair Tarneit switchboards
As you can see in the image the arrow pointing up will either be labeled Stove or Oven . This one is in the on position. You must switch it off . The when you go back to the oven your clock will be off and not flashing.
2. Take the back panel off inside the oven … there are about six screws to remove and then you will see the two heating elements and fans in the center of them.
Technika oven element replacement Tarneit – Removing the back plate to expose heating elements
3. Now that the cover is off you can now remove the element and disconnect the two wire that are attached to it. You then us a multimeter on the ohms scale setting. to check the continuity.
tarneit-technika-oven-element-testing
If your reading is too low below 19 ohms you will need to replace the heating element in your oven. once you purchase the right element you the proceed to re installing all the components to the oven and switch power back on .
This is the fist part of many DIY repairs but if your not confident to take on the repair job yourself you can always contact us and book in an oven repair in Tarneit.
Smeg oven repairs in Altona – micro switch not allowing the unit to heat up
Smeg oven repairs in Melbourne ‘s western suburbs oven service Altona 3018- micro switch not allowing the unit to heat up.
Smeg oven repairs Altona western suburbs – micro switch burnt out
The call to our office was that the unit the Smeg oven was not heating up and as mentioned in an earlier post it is the assumption that when an oven doesn’t heat up will always lead to a heating element not working. Well not always or most times.
Here we have a Smeg not heating up and after testing found the micro switch to be at fault. This is a difficult part to access and requires brand knowledge and needless to say a special class tech. Smeg oven’s have a great design and are top quality and easy to use but some models do come with a price tag.
So the local DIY visit to fix your Smeg oven can be doggy. if you have paid good money for the oven then maintenance to be performed by a professional. After an hour of repairs the oven was put back together and operating as expected. If you looking for a Smeg oven repair near you its best to contact a company with the experience or knowledge.
Have you accidentally wiped off the markings on you oven fascia or lost you oven manual ? This can easily be done without any thought … you just went to clean your oven and then gone ! Half rubbed off symbols . No matter the brand Smeg, Blanco, Ilve , Chef, Westinghouse, Technika and more …
Above you can see all the basic symbols / icons and markings on you oven fascia ? Each image shows you a small description for the control of your oven. You can refer to these images no matter what brand or model oven you have as they are a universal symbol’s for the control of the appliance.
Bellow is a full detailed description of each setting –
Fan Forced Rear element – this will be your most used general setting for most dishes.
Upper and lower element without fan forced function – This setting is used for slow rising temperate and doesn’t dry out the bake.
Fan Forced upper and lower element – This is a supper heat setting as it uses three elements, Smeg , Blanco top end units have the additional setting.
Fan and lower element – This is used for bottom base cooking e.g pizza base.
Grill – Well need I say more – Melted cheese sandwiches.
Grill with fan – Uses grill element good for topping crispness.
Upper element – used to complete bake with heat coming from the top element / not to be confused with the grille element.
Lower element – Used to finish base bake.
Defrost – uses fan only and ambient temp. No heating.
And lastly – Oven light.
oven function dial
I hope this has help please leave comment below for something i may have missed .
And if your icons are completely wiped off …there can be some solutions to the problem, on some circumstances there are after market stickers available and with some brands a new fascia can be installed. Give us a call to organise your setting.
Chef oven door repairs Keilor Melbourne North….. We can still find oven door hinges for your chef no matter how old. This is a 1980’s unit still lasting the test of time . The owner have had pleasure in up keeping the double brown oven .
We were told that they would never let go of the unit after 30 years+
[wp_cart_display_product name=”GENUINE-CHEF-HINGE-OVEN-DOOR-LEFT-RIGHT-KIT-51751-RH 51752-Part-51751K” price=”180.00″ thumbnail=”https://www.ovenrepairmelbourne.com.au/blog/wp-content/uploads/2020/02/GENUINE-CHEF-HINGE-OVEN-DOOR-LEFT-RIGHT-KIT-51751-RH-51752-Part-51751K-.jpg” description=”This part is now sold as a kit with both the Left Hand and Right Hand Hinges.” button_text=”Add Me Now”]
[show_wp_shopping_cart]
This part is now sold as a kit with both the Left Hand and Right Hand Hinges.
Technika oven door service and repairs in Bundoora Melbourne North. Our tech had been able to adjust the lower right hinge for the door to close properly. Please view our images below.
Technika oven door repairs Bundoora
As you can see in the second image the door is now sitting flush with the oven fascia.
